ARD in Burnaby can perform this with the following required information:
- Sample type/matrix (sand, rock, tailing, ceramic balls, etc)
- Sample weight that will be provided
- Sample size => 0.5cm, 1cm, 2cm, etc
- Samples must be dry
- Photo of the sample
***Any sample with oily residue or petroleum residue will not be processed at ARD as it sticks to their instrument.***
Alternatively, Campobello Pre-Processing may be able to complete the crushing of the sample; confirm before sending the sample.
Sample can also be subcontracted out to Metro Testing & Engineering in the Burnaby area.
Test code: ESUBCRUSH