There are two main ways to select and toggle whether a test should be made chargeable or non-chargeable. Both are located in the JOBc module.
You can check if a test is chargeable by viewing the "Current Values" tab here: Job Entry Screen > 'Tests Change' > 'Details' -> Current Values tab.
In the column to the far right labeled Chargeable ?, a Yes or No will indicate the setting of that particular test for the selected samples.
Option 1:
Allows for changes to ALL samples:
Under the "Main" tab, highlight the test then select either the Charge or No Charge button. Save and approve.
If only a select number of samples require alteration, select the specific samples with the toggles to the left and follow the steps above. If there are only a few samples on a large job, it can be easier to select the individual samples by taking this route from the Job Screen: 'Samples' -> highlight the sample of interest -> 'Test Details', then adjust as needed using the toggles on left.
Option 2:
An alternative way to change the chargeability of an individual test on a per sample basis is via the SE - Test Browse Screen. (JOBc > Job Entry Screen > Samples > Select sample > Display > Tests > select test > Chargeable.
This option only allows for one sample, one test to be changed at a time.
If you are selecting a non-chargeable test to now be chargeable, you will have to complete the quote and pricing information before saving.
